Product Description

American/NH/ANSI Pin type hearth hose coupling for fire hose

Description
A Fire hose coupling is connector on the end of hose to connect or few it with another hose or with a faucet or hose appliance, this kind of as irrigation sprinkler. It is normally made of steel,brass,stainless steel,aluminium or plastic.Utilised for combining water band with drinking water band ,fire hydrant ,h2o lance and the hearth-combating truck so that they are to offer drinking water or foam misture for putting out fireplace.

Technical Specification

Model KD KY KN KJ
Diameter(mm) DN50 DN65 DN80 DN50 DN65 DN50 DN65 DN50/
DN65
DN65/
DN80
Doing work Stress(Mpa) 1.six
Screening Pressure(Mpa) 2.4
Available Medium Clear Water, Foam blended liquid

 

Fire Hose Coupling Type Inlet Outlet
 
 
British/John Morris Coupling
2.5″BS336 Φ63.5
two”BS336 Φ51
1.5″BS336 Φ38
two.5″BS336 Φ51
two.5″BS336 Φ38
2″BS336 Φ38

 

Fire Hose Coupling Kind Inlet Outlet
 
American(ANSI Pin)Hearth Hose Coupling
2.5″NH Φ63.5
two”NH Φ51
1.5″NH Φ38

 

Hearth Hose Coupling Variety Inlet Outlet
 
Nakajima(Machino) hearth hose coupling
2.5″ Φ63.five
two” Φ51
1.5″ Φ38

 

Hearth Hose Coupling Type Inlet Outlet
 
Forestry Fire Hose Coupling
1.5″ Φ38
one.5″ 1.5″ BSP
1.5″ 1.5″ NPSH
1.5″ F1.5″ BSP

 

Hearth Hose Coupling Type Inlet Outlet
 
Gost(Russian) Fire Hose Coupling
2″ Φ50
two.5″ Φ70
3″ Φ80
4″ Φ100

 

Hearth Hose Coupling Sort Inlet Outlet
UNI Fire Hose Coupling UNI70 Φ70
UNI45 Φ45

 

Fireplace Hose Coupling Variety Inlet Outlet
Storz Hearth Hose Coupling four” STORZ Φ100
three” STORZ Φ75.five
two.5″ STORZ Φ63.five
2″ STORZ Φ51
one 3/4″ STORZ Φ44.five
1″ STORZ Φ38

Photoes


Deal&Shipping

Our Organization
We could supply hearth hose, hearth hose fittings, spray nozzle, coupling, computerized fire sprinkler program goods, gate valves, check out valves, ball valves, and so forth. All these merchandise strictly confirming to JIS, API ans BS specifications. All of our merchandise comply with international top quality requirements and are significantly enjoy in avariety of marketplaces around world. Our manufacturing unit is masking an spot of 15900 square meters, we now in excess of three hundred employees. Our properly-equipped amenities and outstanding quality control during all stages of manufacturing enable us to guarteen overall buyer satisfaction. As a consequence of our large quality merchandise and excellent customer support, we have gained a world income network CZPT the North America, South The united states, Mideast, Southeast Asia, East Europe, etc. 

Certification

Other Fireplace Fighting Gear

US $1.19-8.99
/ Piece
|
50 Pieces

(Min. Order)

###

Certification: GB8013-2005, CCCF, CCC
Surface Treatment: Chrome Plated/Brass
Material: Aluminum/Brass
Type: British/John Morris/ American/Nh/Nakajima(Machino)
Application: Fire Hose Coupling
Transport Package: Bags/Cartons

###

Samples:
US$ 2/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model KD KY KN KJ
Diameter(mm) DN50 DN65 DN80 DN50 DN65 DN50 DN65 DN50/
DN65
DN65/
DN80
Working Pressure(Mpa) 1.6
Testing Pressure(Mpa) 2.4
Available Medium Clear Water, Foam mixed liquid

###

Fire Hose Coupling Type Inlet Outlet
 
 
British/John Morris Coupling
2.5"BS336 Φ63.5
2"BS336 Φ51
1.5"BS336 Φ38
2.5"BS336 Φ51
2.5"BS336 Φ38
2"BS336 Φ38

###

Fire Hose Coupling Type Inlet Outlet
 
American(ANSI Pin)Fire Hose Coupling
2.5"NH Φ63.5
2"NH Φ51
1.5"NH Φ38

###

Fire Hose Coupling Type Inlet Outlet
 
Nakajima(Machino) fire hose coupling
2.5" Φ63.5
2" Φ51
1.5" Φ38

###

Fire Hose Coupling Type Inlet Outlet
 
Forestry Fire Hose Coupling
1.5" Φ38
1.5" 1.5" BSP
1.5" 1.5" NPSH
1.5" F1.5" BSP

###

Fire Hose Coupling Type Inlet Outlet
 
Gost(Russian) Fire Hose Coupling
2" Φ50
2.5" Φ70
3" Φ80
4" Φ100

###

Fire Hose Coupling Type Inlet Outlet
UNI Fire Hose Coupling UNI70 Φ70
UNI45 Φ45

###

Fire Hose Coupling Type Inlet Outlet
Storz Fire Hose Coupling 4" STORZ Φ100
3" STORZ Φ75.5
2.5" STORZ Φ63.5
2" STORZ Φ51
1 3/4" STORZ Φ44.5
1" STORZ Φ38
US $1.19-8.99
/ Piece
|
50 Pieces

(Min. Order)

###

Certification: GB8013-2005, CCCF, CCC
Surface Treatment: Chrome Plated/Brass
Material: Aluminum/Brass
Type: British/John Morris/ American/Nh/Nakajima(Machino)
Application: Fire Hose Coupling
Transport Package: Bags/Cartons

###

Samples:
US$ 2/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model KD KY KN KJ
Diameter(mm) DN50 DN65 DN80 DN50 DN65 DN50 DN65 DN50/
DN65
DN65/
DN80
Working Pressure(Mpa) 1.6
Testing Pressure(Mpa) 2.4
Available Medium Clear Water, Foam mixed liquid

###

Fire Hose Coupling Type Inlet Outlet
 
 
British/John Morris Coupling
2.5"BS336 Φ63.5
2"BS336 Φ51
1.5"BS336 Φ38
2.5"BS336 Φ51
2.5"BS336 Φ38
2"BS336 Φ38

###

Fire Hose Coupling Type Inlet Outlet
 
American(ANSI Pin)Fire Hose Coupling
2.5"NH Φ63.5
2"NH Φ51
1.5"NH Φ38

###

Fire Hose Coupling Type Inlet Outlet
 
Nakajima(Machino) fire hose coupling
2.5" Φ63.5
2" Φ51
1.5" Φ38

###

Fire Hose Coupling Type Inlet Outlet
 
Forestry Fire Hose Coupling
1.5" Φ38
1.5" 1.5" BSP
1.5" 1.5" NPSH
1.5" F1.5" BSP

###

Fire Hose Coupling Type Inlet Outlet
 
Gost(Russian) Fire Hose Coupling
2" Φ50
2.5" Φ70
3" Φ80
4" Φ100

###

Fire Hose Coupling Type Inlet Outlet
UNI Fire Hose Coupling UNI70 Φ70
UNI45 Φ45

###

Fire Hose Coupling Type Inlet Outlet
Storz Fire Hose Coupling 4" STORZ Φ100
3" STORZ Φ75.5
2.5" STORZ Φ63.5
2" STORZ Φ51
1 3/4" STORZ Φ44.5
1" STORZ Φ38

Types of Couplings

A coupling is a device that connects two shafts together. It transmits power from one end to another and is used for joining rotating equipment. A coupling is flexible and can accommodate a certain amount of end movement and misalignment. This allows for more flexibility in applications. Various types of couplings are available, and each one serves a specific purpose.
gearbox

Shaft couplings

There are many types of shaft couplings, and they are used in a wide range of applications. The type you need depends on the torque, speed, and horsepower you need, as well as the size of the shaft and its spatial limitations. You may also need to consider whether the coupling will accommodate misalignment.
Some shaft couplings are flexible, while others are rigid. Flexible couplings can accommodate up to two degrees of misalignment. They are available in different materials, including aluminum, stainless steel, and titanium. They can also be known by different names, depending on the industry. Some couplings can also be used in a single or multiple-shaft application.
The first type of shaft coupling is a rigid coupling, which consists of two parts that fit together tightly around the shafts. These couplings are designed to have more flexibility than sleeved models, and they can be used on fixed shafts as well. The flanged coupling, on the other hand, is designed for heavy loads and is made of two perpendicular flanges. The flanges are large enough to accommodate screws and are generally used with heavy-duty applications.
CZPT shaft couplings are a great choice if you’re looking for a shaft coupling that delivers high performance, durability, and low cost. These metal disc-style couplings provide low backlash and high torsional stiffness. Their high misalignment tolerance reduces reaction loads on connected components, which makes them ideal for high-speed precision applications. Available in single and double-disc models, they have torque ratings of up to 2,200 in-lbs. (250N) and are available in fourteen sizes.
When using shaft couplings, it is important to choose the right type for your application. Backlash can cause a shaft coupling to break or become unusable. In order to prevent this from happening, you should replace worn or loose parts, and ensure that the hub and key are evenly positioned with the shaft. If you’re using a shaft coupling in a motion-control system, it is important to keep the torque level consistent.

Flexible couplings

Flexible couplings are a type of coupling used to connect two shafts. They are made of rubber or plastic and allow for axial movement of the connected equipment. They do not require lubrication and are resistant to fatigue failure. Flexible couplings are useful for a number of applications. A common type of flexible coupling is the gear coupling, which has gear teeth inside its sleeve. Another type of flexible coupling is the metallic membrane coupling. A metallic membrane coupling is flexible due to flexing metallic discs.
One major disadvantage of flexible couplings is their inability to fit certain types of pipe. This is because most couplings need to be stretched to fit the pipe. This problem is often the result of a change in pipe technology. Traditionally, drain and soil pipe is made of ductile iron or cast iron. Today, most pipes are made of PVC, which has a larger outside diameter than either cast or ductile iron. Because of these changes in pipe technology, many coupling manufacturers have not updated their mold sizing.
Flexible couplings can be either metallic, elastomeric, or a combination of the three. While there are some common characteristics of each type, you should always consider the tradeoffs of each type before choosing one. Generally, the most important considerations when selecting a flexible coupling are torque, misalignment, and ease of assembly and maintenance.
Flexible couplings are used in a wide range of industries. They are useful for connecting two pipes to ensure torque transfer. Although the types available are different, these are the most adaptable couplings in the market. They can withstand movement, vibration, and bending without causing any damage to the piping.
gearbox

Clutch couplings

A clutch coupling connects two rotating shafts by friction. The clutch engages power when the engine is running, disengaging power when the brake is applied. Clutch couplings are used in applications where the speed of a machine is variable or where continuous service is required. The clutch can transmit power, torque, and axial force.
Clutch couplings come in a variety of styles and configurations. Some couplings are flexible, while others are rigid. Flexible couplings are available in a variety of materials, including stainless steel and aluminum. Some couplings also have a non-backlash design, which helps compensate for misalignment.
Clutch couplings may be synchronous or asynchronous. Synchronous couplings engage and disengage automatically when the driven machine exceeds its output speed. These couplings are synchronized by a synchronizing mechanism. When the output speed is exceeded, the synchronizing mechanism initiates the engagement process. The synchronizing mechanism does not engage or disengage when the output speed drops.
High speed clutches are available from a variety of manufacturers. Some manufacturers offer OEM assembly, repair services, and third-party logistics. These manufacturers serve the automotive, chemical, food, and wood industries, as well as the oilfield and material handling industries. Custom clutches can be manufactured for specific applications and can be fitted with additional features, such as precision machined teeth or keyway slots and grooves.
Couplings are available in PCE, C/T, and metric bores. Typically, the size of the input and output shafts will determine which type of coupling is needed. In addition, clutches may be configured for intermediate or high speeds, depending on the required torque.

Clamped couplings

Clamped couplings are commonly used in a variety of industries. They can be used in medical equipment, dental equipment, military equipment, laboratory equipment, and in precision industrial controls. They are available in a wide variety of sizes and keyways. This type of coupling offers a number of advantages, including ease of installation and quick and easy replacement.
A clamp coupling connects two parts by compressing them together. The clamping elements can be formed in a variety of ways, but they all have a gap between their surfaces. This friction squeezes the two parts together, much like pulling two rubber gloves apart. This type of coupling is also useful for joining two hoses or piping units.
Clamped couplings are designed with a single or double clamping shaft. The clamping parts are mounted in two halves and are held together by eight socket head cap screws. They offer high torque capacity and require little installation space. Their high rigidity ensures good positioning accuracy, making them ideal for dynamic drives. In addition, they are wear-free and offer simple radial assembly.
The invention relates to a method and system for clamping pipes to a tank vessel. This invention also relates to a method of loading and unloading tank vessels. The method can be used in oil production platforms and other platforms. A single point mooring method is also used in oil production platforms.
Clamped couplings can also be flexible. They can join two shafts together while allowing a small amount of end movement and misalignment. These couplings may also be used in the assembly of motors and gearboxes.
gearbox

CZPT’s coupling

CZPT couplings are designed to be flexible, allowing them to accommodate misaligned shafts and transmit torque in either direction. They are made with three discs, two hubs, and a center that are arranged with grooves and fins. These features allow for two degrees of freedom during assembly, and can accommodate misalignment of up to 5% of the shaft diameter.
CZPT couplings have many uses. For example, they can be used to join two parallel coaxial rotating shafts. Their ability to transmit torque at the same rotation mechanism and speed makes them ideal for applications where electrical currents may be a problem. Because the couplings are not made of metal, they are electrically isolated. Designers should test their couplings during the prototype stage to ensure they are working properly.
The CZPT coupling consists of two hubs with one slot on each. An intermediate disk is located between the two hubs. The discs are used to reduce or prevent wear on other machine parts. CZPT couplings are inexpensive and easy to replace. They also have electrical insulation, which makes them easy to repair or replace.
CZPT couplings are a popular choice for stepper motor-driven positioning stages. The plastic center disc offers electrical isolation and absorbs shocks from frequent start/stops. These couplings are available in through-hub and blind-bore styles and can be installed in many applications.
CZPT couplings also allow for small degrees of shaft misalignment. This allows them to function in systems where shaft access is limited. They are easily removed without tools.
China American/Nh/ANSI Pin Type Fire Hose Coupling for Fire Hose     cohesion and couplingChina American/Nh/ANSI Pin Type Fire Hose Coupling for Fire Hose     cohesion and coupling
editor by czh 2022-12-26