C Kind Flex-Flex Couplings
The C Form coupling consists of two flex hubs, one particular sleeve and a single accessory kit consisting of seals and snap rings.
CFR Kind Flex-Rigid Couplings
The CFR Kind coupling include one flex hub, 1 rigid hub, a single sleeve, 1 accessory kit consisting of seals and snap rings.
Straightforward and reasonably priced style of gear coupling
All steel sleves and hubs
Reinforced rubber seals with snap rings to hold lubricant in location
Offered as vertical and horizontal couplings
Broad number of exclusive variations including full-flex, flex-rigid mill motor
Typical configurations are available on the shelf
Ordering Information
Application: Driver and Driven.
Sort and size of coupling, horizontal, vertical and so on.
Power: Motor horspower or torque necessity.
Pace: Motor RPM or Driven RPM.
Distance amongst shaft ends (BSE).
Shaft sizes.
C and CFR Form Couplings
Ordering Data
Puller Holes are conventional on sizes 4 by means of twelve.
Puller Holes can be found for sizes 7/8 as a result of 3.5 at an extra charge.
The BSE (distance Involving Shaft Ends) could differ concerning G and G1.
Interference bores with no set screws are conventional unless of course otherwise specified.
Inch bores and keyway tolerances conform to ANSI / AGMA 9002-B04.
For metric bores and keyway tolerances, seek the advice of Engineering Segment.
Bigger sizes are available, please consult Technical Support.