The 14 sizes of conventional roller chains can be found ranging from 25 to 240 together with individuals in conformity with ANSI (American National Typical Institute), and ISO (International Organization for Standardization).
The chains not only meet the specifications for the minimal tensile strength prescribed by ANSI and ISO, nevertheless they also supply the leading class quality inside the world including a 700 CLASS PINTLE CHAIN higher fatigue power
Suitable utilizes
?General use for driving and lifting products.
Examples
?Driving transfer units as well as other tools. For multilevel parking.
Variety of chains
For selection of a chain, see the tables of “Max. Horsepower Ratings” for conventional roller chains and “Designing of Chain Transmission”. Nevertheless, only for any special situation of reduced speed and less shock, “Low-speed selection” approach may also be referred to.
Conventional roller chains up to 5 strands can be found. The typical method for connecting pins and plates is rivet type (RP).
The cotter sort (CP) is obtainable for typical chains and HK chains of 80 or more substantial.
Sprockets
The standard roller chains can be engaged with common sprockets of your corresponding nominal numbers. For sprockets, refer towards the table of “Dimensions” for every size of chain.
Connecting back links and offset backlinks
For connecting hyperlinks and offset backlinks, refer for the table of “Dimensions” for each dimension of chain.
The connecting hyperlinks are generally R or C connecting hyperlinks through which the pins are clearance-fitted with the connecting plate. Since clearance-fitted hyperlinks are inferior for the base chain in Max. allowable stress as inside the situation of one-pitch offset links (OJ), “Low-speed selection” cannot be referred to. 
Because the Max. kilowatt ratings are determined thinking about the power of connecting hyperlinks and OJ, the clearance-fitted connecting hyperlinks and OJ is often made use of when the chains are chosen according to the “General selection”. Whenever a higher Max. allowable stress is needed for the connecting hyperlink, use the interference-fitted connecting link (H connecting website link) of a HI-PWR-S chain, and while in the case of offset back links, use 2POJ.
