Why Coupling Grease?
Adequate lubrication is important for satisfactory gear coupling operation. Gear Coupling Grease is exclusively designed for gear coupling applications to boost coupling daily life even though drastically decreasing servicing time. Its higher viscosity base oil and tackifier mix to help keep the grease in area and avoid separation and it is actually in comprehensive compliance with NSI/AGMA 9001-B97 lubrication suggestions.
Coupling Grease is dark brown in shade and produced with a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to higher centrifugal forces commonly uncovered in couplings. Bearing or standard purpose greases are inclined to separate and drop effectiveness as a consequence of high centrifugal forces about the several ingredients at higher rotational speeds. These high centrifugal forces encountered in couplings separate the base oil from your thickeners. Hefty thickeners, which have no lubrication characteristics, accumulate while in the gear tooth mesh spot resulting in premature coupling failure. Gear Coupling Grease is made to hugely resistant to centrifugal separation of your oil and thickener, which permits the lubricant to become applied to get a reasonably lengthy time period of time.
One of several secrets to the accomplishment of Gear Coupling Grease would be the variable consistency through the entire functioning cycle on the application. The consistency of our gear coupling grease improvements with the working ailments. Operating in the lubricant underneath actual services disorders leads to the grease to come to be semi-fluid, functionally solash lubricating the put on surfaces with the coupling. Since the grease cools, it returns on the authentic consistency, therefore avoiding leakage.
Gear Coupling Grease is obtainable from stock in 14 oz. cartridges, 1 lb. and five lb. cans.
Minimizing of coupling wear
Resistance to water washing
Corrosion and rust protection
Higher load carrying abilities
Extended relubrication frequency
Use at temperatures as much as 325° F
Staying in place under higher speeds
Resistance to centrifugal separation
Reduction in down time & servicing cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and 1. This grease is specially formulated with a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.